QTY. PART NO. 1 244-040-00313-0BA 1 244-040-00313-0WA 1 Not For Sale 4 327-010-00112W 4 327-010-00112B 6 352-AM04020D603 1 Not For Sale 1 10PR80BZR-DW01 4 351-LM04006A565 1 60DA20AD-DT01 2 352-CM03010D593 4 352-FM04014P602 1 0B-1500-00751 1 354-HM05418 1 355-L0507239 1 355-P0510240
ITEM NO. DESCRIPTION 15. Rear Cabinet (platinum) (charcoal) 16. Right (Red) Terminal 17. Left (Black) Terminal 18. Bracket Ball 19. Aluminum Plate (platinum) (charcoal) 20. Aluminum Base 21. Back Foot Base 22. Rubber Strip 23. Bracket Holder 24. Screw 25. Wrench Box 26. Wrench 27. Screw 28. Iron Plate
QTY. PART NO. 1 Not for Sale 1 Not for Sale 1 215-000-00792 1 215-000-00793 1 320-AL-00187 1 320-AL-00184-0WA 1 320-AL-00184-0W 1 320-AL-00185 1 320-RUB-00186 1 398-NR-00249 1 320-AL-00416 1 351-KM04012A578 1 398-ABS-00250 1 399-FE-00618 1 351-AM03005A015 1 399-FE-00619
TO SERVICE THE MS-1II 1. Remove the grille. 2. Remove the (4) exposed rubber grille retainers; this can be accomplished by carefully pulling them out of their cavities with long-nosed pliers or similar tool. 3. Remove the (4) Phillips screws underneath that are now exposed. 4. Remove the (2) additional screws in their respective cavities at the rear of the housing; push the wall bracket to one side for access with a screwdriver bit. 5. Carefully lift the front baffle, with drivers attached, off the cabinet. Caution � do not pull on the corner of the metal baffle shield, or you may dislodge it from the front baffle.
Infinity Systems, 250 Crossways Park Drive, Woodbury, New York 11797
